Aluminium Component

Aluminum alloys are alloys, of which aluminum (Al) is the main metal. Typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two main classifications, namely cast alloys and wrought alloys, both of which are further subdivided into heat treatable and non heat treatable categories. About 85% of aluminum is used in forged products such as rolled plates, foils and extrusions. Cast aluminum alloys can produce cost-effective products due to their low melting points, although they generally have lower tensile strength than wrought alloys. The most important cast aluminum alloy system is Al–Si, where a high silicon content (4.0–13%) helps provide good casting characteristics. Aluminum alloys are widely used in engineering structures and components that require lightweight or corrosion resistance.

Since the introduction of metal skinned aircraft, alloys composed primarily of aluminum have been very important in aerospace manufacturing. Aluminum-magnesium alloys are lighter than other aluminum alloys and have lower flammability than alloys with high magnesium content. Without anodizing and / or proper painting procedures, a white aluminum oxide protective layer will form on the surface of the aluminum alloy. In a humid environment, galvanic corrosion occurs when an aluminum alloy is electrically contacted with other metals having a higher positive corrosion potential than aluminum, and an electrolyte that allows ion exchange exists. It is called dissimilar metal corrosion, and this process may cause spalling or intergranular corrosion. Aluminum alloys may not have been properly heat treated. This causes the internal elements to separate and the metal corrodes from the inside out.

Aluminum GDC Module

We provide high quality aluminum gravity die castings designed and developed according to customer requirements. The use of high-quality aluminum alloys and proven gravity die casting methods ensure the high quality of our castings. Our products meet the hydraulic machinery, valve industry, marine

Engineering and automotive requirements.

Commercial grade 2 tons per kg

Aluminum parts

We deal in aluminum parts. Engineers worldwide are committed to providing quality aluminum parts. We manufacture these parts using high quality raw materials according to industry standards and customer requirements, such as steel, stainless steel, EN series, brass, copper, aluminum, etc. Our product range includes various parts for automobiles.

Sturdy construction

• Accurate and easy to install

• Excellent quality and perfect surface treatment

• durability

• Dimensional accuracy

• Standard materials

• CNC turned parts.

• Acceptable price

Professional aluminum processing and experience team CNC aluminum machining that requires high accuracy will recommend milling for high tolerances. High-speed 3-axis and 5-axis vertical CNC machining centers, our extensive experience and extensive knowledge help us to achieve extremely tight tolerances, so that your aluminum parts are delivered on time. We analyze your design and meet any special needs. This in-depth verification ensures you get the most efficient processing on your budget, time and materials. After developing CNC aluminum as needed, we can also provide secondary processing and typical aluminum surface treatment operations such as sandblasting, shot peening, polishing, anodizing, oxidation, electrophoresis, chromate, powder coating and spray painting.